Parameter Notes for TVS Devices

1. VWM – is the maximum continuous working DC or pulse voltage of the TVS. When this reverse voltage is applied to the two poles of the TVS, it is in a reverse shutdown state, and the current flowing through…
1. VWM – is the maximum continuous working DC or pulse voltage of the TVS. When this reverse voltage is applied to the two poles of the TVS, it is in a reverse shutdown state, and the current flowing through…
For Mobile Phone applications, JINGYANG can provide multiplicate products for interfaces:
For OTT/TV/Monitor applications, JINGYANG can provide a large number of ultra-low capacitance products with different specifications: Application Part No. Channels Direction Vrwm(V) Cj(pF) Ipp(A) Package HDMIDisplay PortDVIVGA TT0514SP 4 Uni. 5 0.4 5 DFN2510-10L TT0514TL 4 Uni. 5 0.6 2.5 SOT23-6L…
RJ11 connector refers to the connector of the telephone line The name RJ stands for Registered Jack, which is derived from the USOC (Universal Service Ordering Codes, Universal Service Classification Code) code of the Bell System. It was originally the…
Introduction to SPDIF Connector SPDIF (Sony/Philips Digital connector) is an abbreviation for the Sony and Philips digital audio connector. The SPDIF optical connector is widely used in high-definition players, set-top boxes (network TV boxes), and other home audio and video devices.…
Introduction to USB 3.2 Gen1 connector The USB 3.2 Gen1 connector, also known as the third generation of USB protocol, boasts a transmission rate of 5 Gbps. In this nomenclature, “3.2” signifies the protocol version, while “Gen” indicates the transmission…
Type-C Widely used Type-C connectors have gained widespread popularity in recent years due to their versatile design, support for reversible insertion, and lightning-fast data transfer speeds of up to 10 Gbit This connector has become increasingly prevalent in various products…
(1) According to the IEC61000-4-2 international standard, TVS chips must be resistant to ESD impacts of at least 8 KV (MB, contact) and 15 kV (BM, air), and different manufacturers will also adopt higher impact resistance standard. When designing the…
The P/N junction area of ESD (TVS) devices is larger than that of Zener diodes, resulting in ESD (TVS) devices not only having stronger high-voltage tolerance, but also greatly reducing the voltage cut-off rate . ESD (TVS) devices have a…
TVS Layout Requirements (1) The TVS device should be placed as close as possible to the input end of the interference source (the connector is close to the panel), as shown in the figure below, which shows the layout requirements…